Illuminated letters & shop signs
Channel letters in acrylic, stainless steel and zincor, lit from the face or from behind — fabricated in our workshop and installed by our own crew, crane included.
We design, fabricate and install illuminated channel letters, shop signs and full building facades from our own workshop in Dammam. Acrylic, stainless steel and zincor, lit from the face or from behind, fitted by our own crew across the Eastern Province.
A shop sign is the one piece of a brand that has to work at sixty kilometres an hour, in daylight and at night, in two scripts, for years, in Gulf humidity. That is a fabrication problem before it is a design problem, which is why we do both in the same place.
We cut and form acrylic, stainless steel and zincor in our own workshop in Dammam. Acrylic glows across its face and suits a shopfront that should read as light. Stainless — brushed or mirror, laser-cut, in silver or gold — reads as metal by day and, lit from behind, as a dark silhouette on a glowing wall by night. Zincor holds a painted finish outdoors, including over timber and composite cladding.
Which one is right is not a matter of taste. It follows from how far away the sign has to be read, how much light is already on the facade after dark, and how the building is actually built — a glass curtain wall, a stone boundary wall and an architectural fin facade each take a sign differently, and we have installed on all three.
Then our own crew installs it. That includes crane work on multi-storey elevations: hotel canopy fascias, roofline lettering, and vertical corner signs running the full height of a building are jobs we have delivered rather than subcontracted. Most of what we install is bilingual, and Arabic is not a scaled version of Latin — it sits on a different baseline and needs its own optical weight to read at the same distance. We set both and show you the pair before anything is cut.
Materials and finishes we work in
| Material | Where it suits | Lighting |
|---|---|---|
| Acrylic | Shopfronts and interiors where the face itself should glow evenly | Lit from within, through the face |
| Stainless steel — brushed or mirror | Hotel and corporate facades that need weight and a metal finish; laser-cut, in silver or gold | Halo-lit, face-lit, or unlit |
| Zincor | Exterior letters that have to hold a painted finish outdoors, including over timber and composite cladding | Illuminated or unlit |
| Halo lighting | Where the wall behind should carry the glow and the letter reads as a silhouette | LED behind the letter, washing the wall |
| Illuminated sign boxes and LED boards | A single lit panel carrying a whole identity, for fascias and canopies | Evenly backlit |
What a sign from us includes
- A site visit to measure the facade and see it after dark
- A drawing to approve before anything is cut
- Fabrication in our own workshop, not subcontracted out
- Wiring and the lighting test
- Installation by our own crew, including crane work where the elevation needs it
Items in this service
Illuminated totems & facade identity
A lit totem at the kerb and lit letters on the facade, reading as one identity.
Flags, roll-ups & backdrops
The portable set an opening needs: feather flags, pull-up banners and a backdrop.
Every item has two photographs. Hover or tap a photo to see the other one.
Work in this area
Questions we are asked
- What is the difference between acrylic and stainless steel letters?
- Acrylic glows across its whole face, so the sign reads as light. Stainless reads as metal by day and, halo-lit, as a dark silhouette on a glowing wall by night. Acrylic suits a shopfront that wants to be bright; stainless suits a facade that wants to look built.
- How do you decide the size of the letters?
- By the distance the sign has to be read from, not by the width of the facade. A sign read from a main road needs a letter height a passing driver can take in; the same shop read from a mall walkway needs far less. We measure that on the site visit.
- Can you install on a high facade?
- Yes. Our own crew does crane-assisted installation on multi-storey elevations — hotel fascias, roofline lettering and vertical corner signs running the height of a building are work we have delivered.
- Do you work in Arabic and English on the same sign?
- Most of what we install is bilingual, and the two scripts are not simply scaled versions of each other. Arabic sits on a different baseline and needs its own optical weight to read at the same distance. We set both and show you the pair before fabrication.
- How long does a sign take?
- It depends on the size, the material and whether the installation needs a crane or night access, so we give you a date after the site visit rather than a number over the phone. The drawing is approved first; nothing is cut before you have signed it off.
Need this for your business?
Send us the details and we will come back with a recommendation and a price.